1. Цель теста
Количество RB, определенное в 6.2.2.3, основано на выполнении требования по максимальной отдаче мощности (MPR) в кубических метрах (CM).
2. Проверка применима
Это требование к тестированию применяется ко всем типам NR UE выпуска 15 и более поздних версий.
3. Описание теста
1. Начальные условия
Исходные условия представляют собой набор тестовых конфигураций, которые необходимо протестировать UE, и шаги, предпринимаемые SS для приведения UE в правильное состояние измерения. Первоначальная тестовая конфигурация включает условия окружающей среды, тестовую частоту и ширину полосы канала в соответствии с требованиями рабочей полосы частот NR в Таблице 5.3.5-1. Все эти конфигурации должны быть протестированы с использованием тестовых параметров, применимых к каждой ширине полосы канала и разносу поднесущих, см. таблицы с 6.2.2.4.1-1 по 6.2.2.4.1-9. Подробную информацию об восходящем эталонном измерительном канале (rmc) см. в Приложении A.2. Конфигурация PDSCH и PDCCH перед измерением указана в Приложении C.2.
Table 6.2.2.4.1-1: Test Configuration Table (Power Class 1, MPRnarrow)
| Default Conditions | ||||||
|---|---|---|---|---|---|---|
| Test Environment as specified in TS 38.508-1 [10] subclause 4.1 | Normal | |||||
| Test Frequencies as specified in TS 38.508-1 [10] subclause 4.3.1 | Low range, High range | |||||
| Test Channel Bandwidths as specified in TS 38.508-1 [10] subclause 4.3.1 | Lowest and Highest | |||||
| Test SCS as specified in Table 5.3.5-1 | Lowest, Highest | |||||
| Test Parameters | ||||||
| Test ID | Freq | ChBw | SCS | Downlink Configuration | Uplink Configuration | |
| Default | Default | N/A for Maximum Power Reduction (MPR) test case | Modulation | RB allocation (NOTE 1) | ||
| 1 | Low | CP-OFDM 64 QAM | Outer_1RB_Left | |||
| 2 | High | CP-OFDM 64 QAM | Outer_1RB_Right | |||
| 3 | Low | CP-OFDM 64 QAM | 2@0 | |||
| 4 | High | CP-OFDM 64 QAM | 2@NRB-2 | |||
| 5 | Low | CP-OFDM 64 QAM | 7@0 | |||
| 6 | High | CP-OFDM 64 QAM | 7@NRB-7 | |||
| ПРИМЕЧАНИЕ 1. Конкретная конфигурация каждого распределения радиочастот показана в таблице 6.1-2. |
Таблица 6.2.2.4.1-2: Таблица конфигурации испытаний (класс мощности 1, MPRWT, полоса пропускания канала ≤ 200 МГц)
| Default Conditions | ||||||
|---|---|---|---|---|---|---|
| Test Environment as specified in TS 38.508-1 [10] subclause 4.1 | Normal | |||||
| Test Frequencies as specified in TS 38.508-1 [10] subclause 4.3.1 | Low range, Mid range,High range | |||||
| Test Channel Bandwidths as specified in TS 38.508-1 [10] subclause 4.3.1 | Самая низкая и самая высокая поддерживаемая полоса пропускания канала, которая ≤ 200 МГц | |||||
| Test SCS as specified in Table 5.3.5-1 | Lowest, Highest | |||||
| Test Parameters | ||||||
| Test ID | Freq | ChBw | SCS | Downlink Configuration | Uplink Configuration | |
| Default | Default | N/A for Maximum Power Reduction (MPR) test case | Modulation | RB allocation (NOTE 1) | ||
| 1 | Low | DFT-s-OFDM PI/2 BPSK | 8@0 | |||
| 2 | High | DFT-s-OFDM PI/2 BPSK | 8@NRB-8 | |||
| 3 | Mid | DFT-s-OFDM PI/2 BPSK | Outer_Full | |||
| 4 | Mid | DFT-s-OFDM QPSK | Inner_Full_Region2 | |||
| 5 | Low | DFT-s-OFDM QPSK | 8@0 | |||
| 6 | High | DFT-s-OFDM QPSK | 8@NRB-8 | |||
| 7 | Mid | DFT-s-OFDM QPSK | Outer_Full | |||
| 8 | Mid | DFT-s-OFDM 16 QAM | Inner_Full_Region2 | |||
| 9 | Low | DFT-s-OFDM 16 QAM | 8@0 | |||
| 10 | High | DFT-s-OFDM 16 QAM | 8@NRB-8 | |||
| 11 | Mid | DFT-s-OFDM 16 QAM | Outer_Full | |||
| 12 | Low | DFT-s-OFDM 64 QAM | 8@0 | |||
| 13 | High | DFT-s-OFDM 64 QAM | 8@NRB-8 | |||
| 14 | Mid | DFT-s-OFDM 64 QAM | Outer_Full | |||
| 15 | Mid | DFT-s-OFDM 64 QAM | Inner_Full_Region2 | |||
| 16 | Mid | CP-OFDM QPSK | Inner_Full_Region2 | |||
| 17 | Low | CP-OFDM QPSK | 8@0 | |||
| 18 | High | CP-OFDM QPSK | 8@NRB-8 | |||
| 19 | Mid | CP-OFDM QPSK | Outer_Full | |||
| 20 | Low | CP-OFDM 16 QAM | 8@0 | |||
| 21 | High | CP-OFDM 16 QAM | 8@NRB-8 | |||
| 22 | Mid | CP-OFDM 16 QAM | Outer_Full | |||
| 23 | Mid | CP-OFDM 16 QAM | Inner_Full_Region2 | |||
| 24 | Low | CP-OFDM 64 QAM | 8@0 | |||
| 25 | High | CP-OFDM 64 QAM | 8@NRB-8 | |||
| 26 | Mid | CP-OFDM 64 QAM | Outer_Full | |||
| NOTE 1: The specific configuration of each RF allocation is defined in clause 6.1-2. |
Table 6.2.2.4.1-3: Test Configuration Table (Power Class 1, MPRWT, BWchannel = 400 MHz)
| Default Conditions | ||||||
|---|---|---|---|---|---|---|
| Test Environment as specified in TS 38.508-1 [10] subclause 4.1 | Normal | |||||
| Test Frequencies as specified in TS 38.508-1 [10] subclause 4.3.1 | Low range, Mid range, High range | |||||
| Test Channel Bandwidths as specified in TS 38.508-1 [10] subclause 4.3.1 | 400 MHz | |||||
| Test SCS as specified in Table 5.3.5-1 | 120kHz | |||||
| Test Parameters | ||||||
| Test ID | Freq | ChBw | SCS | Downlink Configuration | Uplink Configuration | |
| Default | Default | N/A for Maximum Power Reduction (MPR) test case | Modulation | RB allocation (NOTE 1) | ||
| 1 | Low | DFT-s-OFDM PI/2 BPSK | 8@0 | |||
| 2 | High | DFT-s-OFDM PI/2 BPSK | 8@NRB-8 | |||
| 3 | Mid | DFT-s-OFDM PI/2 BPSK | Outer_Full | |||
| 4 | Mid | DFT-s-OFDM PI/2 BPSK | Inner_Full_Region2 | |||
| 5 | Mid | DFT-s-OFDM QPSK | Inner_Full_Region2 | |||
| 6 | Low | DFT-s-OFDM QPSK | 8@0 | |||
| 7 | High | DFT-s-OFDM QPSK | 8@NRB-8 | |||
| 8 | Default | DFT-s-OFDM QPSK | Outer_Full | |||
| 9 | Mid | DFT-s-OFDM 16 QAM | Inner_Full_Region2 | |||
| 10 | Low | DFT-s-OFDM 16 QAM | 8@0 | |||
| 11 | High | DFT-s-OFDM 16 QAM | 8@NRB-8 | |||
| 12 | Mid | DFT-s-OFDM 16 QAM | Outer_Full | |||
| 13 | Low | DFT-s-OFDM 64 QAM | 8@0 | |||
| 14 | High | DFT-s-OFDM 64 QAM | 8@NRB-8 | |||
| 15 | Mid | DFT-s-OFDM 64 QAM | Outer_Full | |||
| 16 | Mid | CP-OFDM QPSK | Inner_Full_Region2 | |||
| 17 | Low | CP-OFDM QPSK | 8@0 | |||
| 18 | High | CP-OFDM QPSK | 8@NRB-8 | |||
| 19 | Mid | CP-OFDM QPSK | Outer_Full | |||
| 20 | Low | CP-OFDM 16 QAM | 8@0 | |||
| 21 | High | CP-OFDM 16 QAM | 8@NRB-8 | |||
| 22 | Mid | CP-OFDM 16 QAM | Outer_Full | |||
| 23 | Mid | CP-OFDM 16 QAM | Inner_Full_Region2 | |||
| 24 | Low | CP-OFDM 64 QAM | 8@0 | |||
| 25 | High | CP-OFDM 64 QAM | 8@NRB-8 | |||
| 26 | Mid | CP-OFDM 64 QAM | Outer_Full | |||
| NOTE 1: The specific configuration of each RF allocation is defined in clause 6.1-2. |
Table 6.2.2.4.1-4: Void
Table 6.2.2.4.1-5: Void
Table 6.2.2.4.1-6: Void
Таблица 6.2.2.4.1-7: Таблица конфигурации испытаний (классы мощности 2, 3 и 4, MPRNarrow, BWchannel ≤ 200 МГц)
| Default Conditions | ||||||
|---|---|---|---|---|---|---|
| Test Environment as specified in TS 38.508-1 [10] subclause 4.1 | Normal | |||||
| Test Frequencies as specified in TS 38.508-1 [10] subclause 4.3.1 | Low range, High range | |||||
| Test Channel Bandwidths as specified in TS 38.508-1 [10] subclause 4.3.1 | Минимальная и максимальная поддерживаемая полоса пропускания канала ≤ 200 МГц t | |||||
| Test SCS as specified in Table 5.3.5-1 | Lowest, Highest | |||||
| Test Parameters | ||||||
| Test ID | Freq | ChBw | SCS | Downlink Configuration | Uplink Configuration | |
| Default | Default | N/A for Maximum Power Reduction (MPR) test case | Modulation | RB allocation (NOTE 1) | ||
| 1 | Low | DFT-s-OFDM PI/2 BPSK | Outer_1RB_Left | |||
| 2 | High | DFT-s-OFDM PI/2 BPSK | Outer_1RB_Right | |||
| 3 | Low | DFT-s-OFDM QPSK | Outer_1RB_Left | |||
| 4 | High | DFT-s-OFDM QPSK | Outer_1RB_Right | |||
| NOTE 1: The specific configuration of each RF allocation is defined in Table 6.1-1. |
Таблица 6.2.2.4.1-8: Таблица конфигурации испытаний (классы мощности 2, 3 и 4, MPRWT, BWchannel ≤ 200 МГц)
| Default Conditions | ||||||
|---|---|---|---|---|---|---|
| Test Environment as specified in TS 38.508-1 [10] subclause 4.1 | Normal | |||||
| Test Frequencies as specified in TS 38.508-1 [10] subclause 4.3.1 | Low range, Mid range, High range | |||||
| Test Channel Bandwidths as specified in TS 38.508-1 [10] subclause 4.3.1 | Самая низкая и самая высокая поддерживаемая полоса пропускания канала, которая ≤ 200 МГц | |||||
| Test SCS as specified in Table 5.3.5-1 | Lowest, Highest | |||||
| Test Parameters | ||||||
| Test ID | Freq | ChBw | SCS | Downlink Configuration | Uplink Configuration | |
| Default | Default | N/A for Maximum Power Reduction (MPR) test case | Modulation | RB allocation (NOTE 1) | ||
| 1 | Mid | DFT-s-OFDM PI/2 BPSK | Outer_Full | |||
| 2 | Mid | DFT-s-OFDM QPSK | Outer_Full | |||
| 3 | Mid | DFT-s-OFDM 16 QAM | Inner_Full | |||
| 4 | Low | DFT-s-OFDM 16 QAM | Outer_1RB_Left | |||
| 5 | High | DFT-s-OFDM 16 QAM | Outer_1RB_Right | |||
| 6 | Mid | DFT-s-OFDM 16 QAM | Outer_Full | |||
| 7 | Mid | DFT-s-OFDM 64 QAM | Inner_Full | |||
| 8 | Low | DFT-s-OFDM 64 QAM | Outer_1RB_Left | |||
| 9 | High | DFT-s-OFDM 64 QAM | Outer_1RB_Right | |||
| 10 | Mid | DFT-s-OFDM 64 QAM | Outer_Full | |||
| 11 | Mid | CP-OFDM QPSK | Inner_Full | |||
| 12 | Low | CP-OFDM QPSK | Outer_1RB_Left | |||
| 13 | High | CP-OFDM QPSK | Outer_1RB_Right | |||
| 14 | Mid | CP-OFDM QPSK | Outer_Full | |||
| 15 | Low | CP-OFDM 16 QAM | Outer_1RB_Left | |||
| 16 | High | CP-OFDM 16 QAM | Outer_1RB_Right | |||
| 17 | Mid | CP-OFDM 16 QAM | Outer_Full | |||
| 18 | Low | CP-OFDM 64 QAM | Outer_1RB_Left | |||
| 19 | High | CP-OFDM 64 QAM | Outer_1RB_Right | |||
| 20 | Mid | CP-OFDM 64 QAM | Outer_Full | |||
| NOTE 1: The specific configuration of each RF allocation is defined in Table 6.1-1. |
Table 6.2.2.4.1-9: Test Configuration Table (Power Class 2, 3 and 4, MPRWT, BWchannel = 400 MHz)
| Default Conditions | ||||||
|---|---|---|---|---|---|---|
| Test Environment as specified in TS 38.508-1 [10] subclause 4.1 | Normal | |||||
| Test Frequencies as specified in TS 38.508-1 [10] subclause 4.3.1 | Low range, High range | |||||
| Test Channel Bandwidths as specified in TS 38.508-1 [10] subclause 4.3.1 | 400 MHz | |||||
| Test SCS as specified in Table 5.3.5-1 | 120kHz | |||||
| Test Parameters | ||||||
| Test ID | Freq | ChBw | SCS | Downlink Configuration | Uplink Configuration | |
| Default | Default | N/A for Maximum Power Reduction (MPR) test case | Modulation | RB allocation (NOTE 1) | ||
| 1 | Low | DFT-s-OFDM PI/2 BPSK | Outer_1RB_Left | |||
| 2 | High | DFT-s-OFDM PI/2 BPSK | Outer_1RB_Right | |||
| 3 | Mid | DFT-s-OFDM PI/2 BPSK | Outer_Full | |||
| 4 | Low | DFT-s-OFDM QPSK | Outer_1RB_Left | |||
| 5 | High | DFT-s-OFDM QPSK | Outer_1RB_Right | |||
| 6 | Mid | DFT-s-OFDM QPSK | Outer_Full | |||
| 7 | Low | DFT-s-OFDM 16 QAM | Outer_1RB_Left | |||
| 8 | High | DFT-s-OFDM 16 QAM | Outer_1RB_Right | |||
| 9 | Mid | DFT-s-OFDM 16 QAM | Outer_Full | |||
| 10 | Low | DFT-s-OFDM 64 QAM | Outer_1RB_Left | |||
| 11 | High | DFT-s-OFDM 64 QAM | Outer_1RB_Right | |||
| 12 | Mid | DFT-s-OFDM 64 QAM | Outer_Full | |||
| 13 | Low | CP-OFDM QPSK | Outer_1RB_Left | |||
| 14 | High | CP-OFDM QPSK | Outer_1RB_Right | |||
| 15 | Mid | CP-OFDM QPSK | Outer_Full | |||
| 16 | Low | CP-OFDM 16 QAM | Outer_1RB_Left | |||
| 17 | High | CP-OFDM 16 QAM | Outer_1RB_Right | |||
| 18 | Mid | CP-OFDM 16 QAM | Outer_Full | |||
| 19 | Low | CP-OFDM 64 QAM | Outer_1RB_Left | |||
| 20 | High | CP-OFDM 64 QAM | Outer_1RB_Right | |||
| 21 | Mid | CP-OFDM 64 QAM | Outer_Full | |||
| NOTE 1: The specific configuration of each RF allocation is defined in Table 6.1-1. |
2. Шаги тестирования
1. SS отправляет информацию о планировании восходящей линии связи для каждого процесса HARQ UL для C_RNTI через PDCCH DCI формата 0_1 для планирования RMC UL в соответствии с таблицами с 6.2.2.4.1-1 по 6.2.2.4.1-9. Поскольку UL не имеет полезной нагрузки и данных обратной связи для отправки, UE отправляет заполняющие биты MAC восходящей линии связи на UL RMC.
2. Как описано в Приложении K.1.1, установите для UE направление пика луча Tx, найденное при сканировании 3D EIRP. Подождите не менее BEAM_SELECT_WAIT_TIME (ПРИМЕЧАНИЕ 1) для завершения выбора луча Tx UE.
3. Непрерывно отправлять команду «up» управления мощностью восходящей линии связи на UE в каждой информации планирования восходящей линии связи; UE требуется не менее 200 миллисекунд для достижения уровня PUMAX. Подождите не менее BEAM_SELECT_WAIT_TIME (примечание 1) для завершения выбора луча Tx UE.
4. SS активирует функцию Beamlock UE (UBF) только путем выполнения процедуры, указанной в пункте 4.9.2 TS 38.508-1 [10] с условным Tx.
5. В соответствии с тестовой конфигурацией в пределах полосы пропускания канала режима радиодоступа EIRP UE измеряется в направлении пика луча Tx, что должно соответствовать требованиям, описанным в 6.2.2.5. Процедура тестирования EIRP определена в Приложении K.1.3. Продолжительность измерения составляет один активный подкадр восходящей линии связи. Расчет EIRP учитывает два угла поляризации, тета и фи.
6. SS деактивирует функцию Beamlock UE (UBF), выполнив процедуру, указанную в разделе 4.9.3 TS 38.508-1 [10].
ПРИМЕЧАНИЕ 1 Значение по умолчанию BEAM_SELECT_WAIT_TIME определено в Приложении K.1.1.
Примечание 2. При переключении на форму сигнала DFT-s-OFDM, как указано в таблицах конфигурации теста с 6.2.2.4.1-1 по 6.2.2.4.1-9, отправьте сообщение NR RRCReconfiguration в соответствии с TS 38.508-1 [10]] ] Пункт 4.6.3 Таблица 4.6.3-118 PUSCH-Config с условием TRANSFORM_PRECODER_ENABLED.
4. Требования к испытаниям
Максимальная выходная мощность, измеренная на шаге 5, должна находиться в пределах максимальной выходной мощности и допусков, указанных в таблице ниже.
Table 6.2.2.5-1: UE Power Class test requirements for Power Class 1 ( for Bands n257, n258, n261 )
| Test Configuration Table | Test ID | PPowerclass | MPRf,c | T(MPRf,c) | Lower limit(dBm) | Upper limit(dBm) |
|---|---|---|---|---|---|---|
| Table 6.2.2.4.1-1 | 1 | 40 | 14.4 | 7 | 18.6-TT | 55 |
| 2 | 40 | 14.4 | 7 | 18.6-TT | 55 | |
| 3 | 40 | 10 | 5 | 25-TT | 55 | |
| 4 | 40 | 10 | 5 | 25-TT | 55 | |
| 5 | 40 | 10 | 5 | 25-TT | 55 | |
| 6 | 40 | 10 | 5 | 25-TT | 55 | |
| Table 6.2.2.4.1-2 | 1 | 40 | 5.5 | 5 | 29.5-TT | 55 |
| 2 | 40 | 5.5 | 5 | 29.5-TT | 55 | |
| 3 | 40 | 5.5 | 5 | 29.5-TT | 55 | |
| 4 | 40 | 3 | 2 | 35-TT | 55 | |
| 5 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 6 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 7 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 8 | 40 | 4 | 3 | 33-TT | 55 | |
| 9 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 10 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 11 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 12 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 13 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 14 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 15 | 40 | 5 | 4 | 31-TT | 55 | |
| 16 | 40 | 4.5 | 4 | 31.5-TT | 55 | |
| 17 | 40 | 7 | 5 | 28-TT | 55 | |
| 18 | 40 | 7 | 5 | 28-TT | 55 | |
| 19 | 40 | 7 | 5 | 28-TT | 55 | |
| 20 | 40 | 7 | 5 | 28-TT | 55 | |
| 21 | 40 | 7 | 5 | 28-TT | 55 | |
| 22 | 40 | 7 | 5 | 28-TT | 55 | |
| 23 | 40 | 5.5 | 5 | 29.5-TT | 55 | |
| 24 | 40 | 7.5 | 5 | 27.5-TT | 55 | |
| 256 | 40 | 7.5 | 5 | 27.5-TT | 55 | |
| 26 | 40 | 7.5 | 5 | 27.5-TT | 55 | |
| Table 6.2.2.4.1-3 | 1 | 40 | 5.5 | 5 | 29.5-TT | 55 |
| 2 | 40 | 5.5 | 5 | 29.5-TT | 55 | |
| 3 | 40 | 5.5 | 5 | 29.5-TT | 55 | |
| 4 | 40 | 3 | 2 | 35-TT | 55 | |
| 5 | 40 | 3.5 | 3 | 33.5-TT | 55 | |
| 6 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 7 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 8 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 9 | 40 | 4.5 | 4 | 31.5-TT | 55 | |
| 10 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 11 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 12 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 13 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 14 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 15 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 16 | 40 | 5 | 4 | 31-TT | 55 | |
| 17 | 40 | 7 | 5 | 28-TT | 55 | |
| 18 | 40 | 7 | 5 | 28-TT | 55 | |
| 19 | 40 | 7 | 5 | 28-TT | 55 | |
| 20 | 40 | 7 | 5 | 28-TT | 55 | |
| 21 | 40 | 7 | 5 | 28-TT | 55 | |
| 22 | 40 | 7 | 5 | 28-TT | 55 | |
| 23 | 40 | 6.5 | 5 | 28.5-TT | 55 | |
| 24 | 40 | 9 | 5 | 26-TT | 55 | |
| 25 | 40 | 9 | 5 | 26-TT | 55 | |
| 26 | 40 | 9 | 5 | 26-TT | 55 |
Table 6.2.2.5-1a: UE Power Class test requirements for Power Class 1 ( for Bands n260 )
| Test Configuration Table | Test ID | PPowerclass | MPRf,c | T(MPRf,c) | Lower limit(dBm) | Upper limit(dBm) |
|---|---|---|---|---|---|---|
| Table 6.2.2.4.1-1 | 1 | 38 | 14.4 | 7 | 16.6-TT | 55 |
| 2 | 38 | 14.4 | 7 | 16.6-TT | 55 | |
| 3 | 38 | 10 | 5 | 23-TT | 55 | |
| 4 | 38 | 10 | 5 | 23-TT | 55 | |
| 5 | 38 | 10 | 5 | 23-TT | 55 | |
| 6 | 38 | 10 | 5 | 23-TT | 55 | |
| Table 6.2.2.4.1-2 | 1 | 38 | 5.5 | 5 | 27.5-TT | 55 |
| 2 | 38 | 5.5 | 5 | 27.5-TT | 55 | |
| 3 | 38 | 5.5 | 5 | 27.5-TT | 55 | |
| 4 | 38 | 3 | 2 | 33-TT | 55 | |
| 5 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 6 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 7 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 8 | 38 | 4 | 3 | 31-TT | 55 | |
| 9 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 10 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 11 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 12 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 13 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 14 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 15 | 38 | 5 | 4 | 29-TT | 55 | |
| 16 | 38 | 4.5 | 4 | 29.5-TT | 55 | |
| 17 | 38 | 7 | 5 | 26-TT | 55 | |
| 18 | 38 | 7 | 5 | 26-TT | 55 | |
| 19 | 38 | 7 | 5 | 26-TT | 55 | |
| 20 | 38 | 7 | 5 | 26-TT | 55 | |
| 21 | 38 | 7 | 5 | 26-TT | 55 | |
| 22 | 38 | 7 | 5 | 26-TT | 55 | |
| 23 | 38 | 5.5 | 5 | 27.5-TT | 55 | |
| 24 | 38 | 7.5 | 5 | 25.5-TT | 55 | |
| 25 | 38 | 7.5 | 5 | 25.5-TT | 55 | |
| 26 | 38 | 7.5 | 5 | 25.5-TT | 55 | |
| Table 6.2.2.4.1-3 | 1 | 38 | 5.5 | 5 | 27.5-TT | 55 |
| 2 | 38 | 5.5 | 5 | 27.5-TT | 55 | |
| 3 | 38 | 5.5 | 5 | 27.5-TT | 55 | |
| 4 | 38 | 3 | 2 | 33-TT | 55 | |
| 5 | 38 | 3.5 | 3 | 31.5-TT | 55 | |
| 6 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 7 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 8 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 9 | 38 | 4.5 | 4 | 29.5-TT | 55 | |
| 10 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 11 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 12 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 13 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 14 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 15 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 16 | 38 | 5 | 4 | 29-TT | 55 | |
| 17 | 38 | 7 | 5 | 26-TT | 55 | |
| 18 | 38 | 7 | 5 | 26-TT | 55 | |
| 19 | 38 | 7 | 5 | 26-TT | 55 | |
| 20 | 38 | 7 | 5 | 26-TT | 55 | |
| 21 | 38 | 7 | 5 | 26-TT | 55 | |
| 22 | 38 | 7 | 5 | 26-TT | 55 | |
| 23 | 38 | 6.5 | 5 | 26.5-TT | 55 | |
| 24 | 38 | 9 | 5 | 24-TT | 55 | |
| 25 | 38 | 9 | 5 | 24-TT | 55 | |
| 26 | 38 | 9 | 5 | 24-TT | 55 |
Table 6.2.2.5-2: UE Power Class test requirements for Power Class 2
| Test Configuration Table | Test ID | PPowerclass | MPRf,c | T(MPRf,c) | Lower limit(dBm) | Upper limit(dBm) |
|---|---|---|---|---|---|---|
| Table 6.2.2.4.1-7 | 1 | 29 | 2.5 | 2 | 24.5-TT | 43 |
| 2 | 29 | 2.5 | 2 | 24.5-TT | 43 | |
| 3 | 29 | 2.5 | 2 | 24.5-TT | 43 | |
| 4 | 29 | 2.5 | 2 | 24.5-TT | 43 | |
| Table 6.2.2.4.1-8 | 1 | 29 | 2 | 1.5 | 25.5-TT | 43 |
| 2 | 29 | 2 | 1.5 | 25.5-TT | 43 | |
| 3 | 29 | 3 | 2 | 24-TT | 43 | |
| 4 | 29 | 3.5 | 3 | 22.5-TT | 43 | |
| 5 | 29 | 3.5 | 3 | 22.5-TT | 43 | |
| 6 | 29 | 3.5 | 3 | 22.5-TT | 43 | |
| 7 | 29 | 5 | 4 | 20-TT | 43 | |
| 8 | 29 | 5.5 | 5 | 18.5-TT | 43 | |
| 9 | 29 | 5.5 | 5 | 18.5-TT | 43 | |
| 10 | 29 | 5.5 | 5 | 18.5-TT | 43 | |
| 11 | 29 | 3.5 | 3 | 22.5-TT | 43 | |
| 12 | 29 | 4 | 3 | 22-TT | 43 | |
| 13 | 29 | 4 | 3 | 22-TT | 43 | |
| 14 | 29 | 4 | 3 | 22-TT | 43 | |
| 15 | 29 | 5 | 4 | 20-TT | 43 | |
| 16 | 29 | 5 | 4 | 20-TT | 43 | |
| 17 | 29 | 5 | 4 | 20-TT | 43 | |
| 18 | 29 | 7 | 5 | 17-TT | 43 | |
| 19 | 29 | 7 | 5 | 17-TT | 43 | |
| 20 | 29 | 7 | 5 | 17-TT | 43 | |
| Table 6.2.2.4.1-9 | 1 | 29 | 3 | 2 | 24-TT | 43 |
| 2 | 29 | 3 | 2 | 24-TT | 43 | |
| 3 | 29 | 3 | 2 | 24-TT | 43 | |
| 4 | 29 | 3 | 2 | 24-TT | 43 | |
| 5 | 29 | 3 | 2 | 24-TT | 43 | |
| 6 | 29 | 3 | 2 | 24-TT | 43 | |
| 7 | 29 | 4.5 | 4 | 20.5-TT | 43 | |
| 8 | 29 | 4.5 | 4 | 20.5-TT | 43 | |
| 9 | 29 | 4.5 | 4 | 20.5-TT | 43 | |
| 10 | 29 | 6.5 | 5 | 17.5-TT | 43 | |
| 11 | 29 | 6.5 | 5 | 17.5-TT | 43 | |
| 12 | 29 | 6.5 | 5 | 17.5-TT | 43 | |
| 13 | 29 | 5 | 4 | 20-TT | 43 | |
| 14 | 29 | 5 | 4 | 20-TT | 43 | |
| 15 | 29 | 5 | 4 | 20-TT | 43 | |
| 16 | 29 | 6.5 | 5 | 17.5-TT | 43 | |
| 17 | 29 | 6.5 | 5 | 17.5-TT | 43 | |
| 18 | 29 | 6.5 | 5 | 17.5-TT | 43 | |
| 19 | 29 | 9 | 5 | 15-TT | 43 | |
| 20 | 29 | 9 | 5 | 15-TT | 43 | |
| 21 | 29 | 9 | 5 | 15-TT | 43 |
Table 6.2.2.5-3: UE Power Class test requirements for Power Class 3 ( n257, 258, 261 )
| Test Configuration Table | Test ID | PPowerclass | MPRf,c | T(MPRf,c) | Lower limit(dBm) | Upper limit(dBm) |
|---|---|---|---|---|---|---|
| Table 6.2.2.4.1-7 | 1 | 22.4 | 2.5 | 2 | 17.9-TT-ΔMBP,n | 43 |
| 2 | 22.4 | 2.5 | 2 | 17.9-TT-ΔMBP,n | 43 | |
| 3 | 22.4 | 2.5 | 2 | 17.9-TT-ΔMBP,n | 43 | |
| 4 | 22.4 | 2.5 | 2 | 17.9-TT-ΔMBP,n | 43 | |
| Table 6.2.2.4.1-8 | 1 | 22.4 | 2 | 1.5 | 18.9-TT-ΔMBP,n | 43 |
| 2 | 22.4 | 2 | 1.5 | 18.9-TT-ΔMBP,n | 43 | |
| 3 | 22.4 | 3 | 2 | 17.4-TT-ΔMBP,n | 43 | |
| 4 | 22.4 | 3.5 | 3 | 15.9-TT-ΔMBP,n | 43 | |
| 5 | 22.4 | 3.5 | 3 | 15.9-TT-ΔMBP,n | 43 | |
| 6 | 22.4 | 3.5 | 3 | 15.9-TT-ΔMBP,n | 43 | |
| 7 | 22.4 | 5 | 4 | 13.4-TT-ΔMBP,n | 43 | |
| 8 | 22.4 | 5.5 | 5 | 11.9-TT-ΔMBP,n | 43 | |
| 9 | 22.4 | 5.5 | 5 | 11.9-TT-ΔMBP,n | 43 | |
| 10 | 22.4 | 5.5 | 5 | 11.9-TT-ΔMBP,n | 43 | |
| 11 | 22.4 | 3.5 | 3 | 15.9-TT-ΔMBP,n | 43 | |
| 12 | 22.4 | 4 | 3 | 15.4-TT-ΔMBP,n | 43 | |
| 13 | 22.4 | 4 | 3 | 15.4-TT-ΔMBP,n | 43 | |
| 14 | 22.4 | 4 | 3 | 15.4-TT-ΔMBP,n | 43 | |
| 15 | 22.4 | 5 | 4 | 13.4-TT-ΔMBP,n | 43 | |
| 16 | 22.4 | 5 | 4 | 13.4-TT-ΔMBP,n | 43 | |
| 17 | 22.4 | 5 | 4 | 13.4-TT-ΔMBP,n | 43 | |
| 18 | 22.4 | 7 | 5 | 10.4-TT-ΔMBP,n | 43 | |
| 19 | 22.4 | 7 | 5 | 10.4-TT-ΔMBP,n | 43 | |
| 20 | 22.4 | 7 | 5 | 10.4-TT-ΔMBP,n | 43 | |
| Table 6.2.2.4.1-9 | 1 | 22.4 | 3 | 2 | 17.4-TT-ΔMBP,n | 43 |
| 2 | 22.4 | 3 | 2 | 17.4-TT-ΔMBP,n | 43 | |
| 3 | 22.4 | 3 | 2 | 17.4-TT-ΔMBP,n | 43 | |
| 4 | 22.4 | 3 | 2 | 17.4-TT-ΔMBP,n | 43 | |
| 5 | 22.4 | 3 | 2 | 17.4-TT-ΔMBP,n | 43 | |
| 6 | 22.4 | 3 | 2 | 17.4-TT-ΔMBP,n | 43 | |
| 7 | 22.4 | 4.5 | 4 | 13.9-TT-ΔMBP,n | 43 | |
| 8 | 22.4 | 4.5 | 4 | 13.9-TT-ΔMBP,n | 43 | |
| 9 | 22.4 | 4.5 | 4 | 13.9-TT-ΔMBP,n | 43 | |
| 10 | 22.4 | 6.5 | 5 | 10.9-TT-ΔMBP,n | 43 | |
| 11 | 22.4 | 6.5 | 5 | 10.9-TT-ΔMBP,n | 43 | |
| 12 | 22.4 | 6.5 | 5 | 10.9-TT-ΔMBP,n | 43 | |
| 13 | 22.4 | 5 | 4 | 13.4-TT-ΔMBP,n | 43 | |
| 14 | 22.4 | 5 | 4 | 13.4-TT-ΔMBP,n | 43 | |
| 15 | 22.4 | 5 | 4 | 13.4-TT-ΔMBP,n | 43 | |
| 16 | 22.4 | 6.5 | 5 | 10.9-TT-ΔMBP,n | 43 | |
| 17 | 22.4 | 6.5 | 5 | 10.9-TT-ΔMBP,n | 43 | |
| 18 | 22.4 | 6.5 | 5 | 10.9-TT-ΔMBP,n | 43 | |
| 19 | 22.4 | 9 | 5 | 8.4-TT-ΔMBP,n | 43 | |
| 20 | 22.4 | 9 | 5 | 8.4-TT-ΔMBP,n | 43 | |
| 21 | 22.4 | 9 | 5 | 8.4-TT-ΔMBP,n | 43 | |
| Примечание 1: ΔMBP,n — многополосный коэффициент релаксации, заявленный UE для тестовой полосы в таблице a.4.39-2 TS38.508-2. Это заявление должно соответствовать требованиям пункта 6.2.1.1.3.3. Примечание 2. Все диапазоны, поддерживаемые UE, необходимо протестировать, чтобы убедиться, что многодиапазонный ослабленный оператор соответствует требованиям. Примечание 3. Сумма максимально допустимого ΔMBP,n по всем поддерживаемым диапазонам FR2 определяется в пункте 6.2.1.1.3.3. Примечание 4: ΔMBP одной полосы частот, n равно 0 |
Table 6.2.2.5-3a: UE Power Class test requirements for Power Class 3 ( n260 )
| Test Configuration Table | Test ID | PPowerclass | MPRf,c | T(MPRf,c) | Lower limit(dBm) | Upper limit(dBm) |
|---|---|---|---|---|---|---|
| Table 6.2.2.4.1-7 | 1 | 20.6 | 2.5 | 2 | 16.1-TT-ΔMBP,n | 43 |
| 2 | 20.6 | 2.5 | 2 | 16.1-TT-ΔMBP,n | 43 | |
| 3 | 20.6 | 2.5 | 2 | 16.1-TT-ΔMBP,n | 43 | |
| 4 | 20.6 | 2.5 | 2 | 16.1-TT-ΔMBP,n | 43 | |
| Table 6.2.2.4.1-8 | 1 | 20.6 | 2 | 1.5 | 17.1-TT-ΔMBP,n | 43 |
| 2 | 20.6 | 2 | 1.5 | 17.1-TT-ΔMBP,n | 43 | |
| 3 | 20.6 | 3 | 2 | 15.6-TT-ΔMBP,n | 43 | |
| 4 | 20.6 | 3.5 | 3 | 14.1-TT-ΔMBP,n | 43 | |
| 5 | 20.6 | 3.5 | 3 | 14.1-TT-ΔMBP,n | 43 | |
| 6 | 20.6 | 3.5 | 3 | 14.1-TT-ΔMBP,n | 43 | |
| 7 | 20.6 | 5 | 4 | 11.6-TT-ΔMBP,n | 43 | |
| 8 | 20.6 | 5.5 | 5 | 10.1-TT-ΔMBP,n | 43 | |
| 9 | 20.6 | 5.5 | 5 | 10.1-TT-ΔMBP,n | 43 | |
| 10 | 20.6 | 5.5 | 5 | 10.1-TT-ΔMBP,n | 43 | |
| 11 | 20.6 | 3.5 | 3 | 14.1-TT-ΔMBP,n | 43 | |
| 12 | 20.6 | 4 | 3 | 13.6-TT-ΔMBP,n | 43 | |
| 13 | 20.6 | 4 | 3 | 13.6-TT-ΔMBP,n | 43 | |
| 14 | 20.6 | 4 | 3 | 13.6-TT-ΔMBP,n | 43 | |
| 15 | 20.6 | 5 | 4 | 11.6-TT-ΔMBP,n | 43 | |
| 16 | 20.6 | 5 | 4 | 11.6-TT-ΔMBP,n | 43 | |
| 17 | 20.6 | 5 | 4 | 11.6-TT-ΔMBP,n | 43 | |
| 18 | 20.6 | 7 | 5 | 8.6-TT-ΔMBP,n | 43 | |
| 19 | 20.6 | 7 | 5 | 8.6-TT-ΔMBP,n | 43 | |
| 20 | 20.6 | 7 | 5 | 8.6-TT-ΔMBP,n | 43 | |
| Table 6.2.2.4.1-9 | 1 | 20.6 | 3 | 2 | 15.6-TT-ΔMBP,n | 43 |
| 2 | 20.6 | 3 | 2 | 15.6-TT-ΔMBP,n | 43 | |
| 3 | 20.6 | 3 | 2 | 15.6-TT-ΔMBP,n | 43 | |
| 4 | 20.6 | 3 | 2 | 15.6-TT-ΔMBP,n | 43 | |
| 5 | 20.6 | 3 | 2 | 15.6-TT-ΔMBP,n | 43 | |
| 6 | 20.6 | 3 | 2 | 15.6-TT-ΔMBP,n | 43 | |
| 7 | 20.6 | 4.5 | 4 | 12.1-TT-ΔMBP,n | 43 | |
| 8 | 20.6 | 4.5 | 4 | 12.1-TT-ΔMBP,n | 43 | |
| 9 | 20.6 | 4.5 | 4 | 12.1-TT-ΔMBP,n | 43 | |
| 10 | 20.6 | 6.5 | 5 | 9.1-TT-ΔMBP,n | 43 | |
| 11 | 20.6 | 6.5 | 5 | 9.1-TT-ΔMBP,n | 43 | |
| 12 | 20.6 | 6.5 | 5 | 9.1-TT-ΔMBP,n | 43 | |
| 13 | 20.6 | 5 | 4 | 11.6-TT-ΔMBP,n | 43 | |
| 14 | 20.6 | 5 | 4 | 11.6-TT-ΔMBP,n | 43 | |
| 15 | 20.6 | 5 | 4 | 11.6-TT-ΔMBP,n | 43 | |
| 16 | 20.6 | 6.5 | 5 | 9.1-TT-ΔMBP,n | 43 | |
| 17 | 20.6 | 6.5 | 5 | 9.1-TT-ΔMBP,n | 43 | |
| 18 | 20.6 | 6.5 | 5 | 9.1-TT-ΔMBP,n | 43 | |
| 19 | 20.6 | 9 | 5 | 6.6-TT-ΔMBP,n | 43 | |
| 20 | 20.6 | 9 | 5 | 6.6-TT-ΔMBP,n | 43 | |
| 21 | 20.6 | 9 | 5 | 6.6-TT-ΔMBP,n | 43 | |
| Примечание 1: ΔMBP,n — коэффициент многодиапазонной релаксации, заявленный UE для тестового диапазона в таблице A.4.3.9-2 TS38.508-2. Это заявление должно соответствовать требованиям пункта 6.2.1.1.3.3. Примечание 2. Все диапазоны, поддерживаемые UE, необходимо протестировать, чтобы убедиться, что многодиапазонный ослабленный оператор соответствует требованиям. Примечание 3. Сумма максимально допустимого ΔMBP,n по всем поддерживаемым диапазонам FR2 определяется в пункте 6.2.1.1.3.3. Примечание 4: ΔMBP для одной полосы, n равно 0 |
Table 6.2.2.5-3b: Test Tolerance (Power class 3)
| Test Metric | FR2a | FR2b |
|---|---|---|
| Размер тихой зоны ≤ 30 см | 3.11 dB | 3.11 dB |
Table 6.2.2.5-4: UE Power Class test requirements for Power Class 4 ( n257, 258, 261 )
| Test Configuration Table | Test ID | PPowerclass | MPRf,c | T(MPRf,c) | Lower limit(dBm) | Upper limit(dBm) |
|---|---|---|---|---|---|---|
| Table 6.2.2.4.1-7 | 1 | 34 | 2.5 | 2 | 29.5-TT | 43 |
| 2 | 34 | 2.5 | 2 | 29.5-TT | 43 | |
| 3 | 34 | 2.5 | 2 | 29.5-TT | 43 | |
| 4 | 34 | 2.5 | 2 | 29.5-TT | 43 | |
| Table 6.2.2.4.1-8 | 1 | 34 | 2 | 1.5 | 30.5-TT | 43 |
| 2 | 34 | 2 | 1.5 | 30.5-TT | 43 | |
| 3 | 34 | 3 | 2 | 29-TT | 43 | |
| 4 | 34 | 3.5 | 3 | 27.5-TT | 43 | |
| 5 | 34 | 3.5 | 3 | 27.5-TT | 43 | |
| 6 | 34 | 3.5 | 3 | 27.5-TT | 43 | |
| 7 | 34 | 5 | 4 | 25-TT | 43 | |
| 8 | 34 | 5.5 | 5 | 23.5-TT | 43 | |
| 9 | 34 | 5.5 | 5 | 23.5-TT | 43 | |
| 10 | 34 | 5.5 | 5 | 23.5-TT | 43 | |
| 11 | 34 | 3.5 | 3 | 27.5-TT | 43 | |
| 12 | 34 | 4 | 3 | 27-TT | 43 | |
| 13 | 34 | 4 | 3 | 27-TT | 43 | |
| 14 | 34 | 4 | 3 | 27-TT | 43 | |
| 15 | 34 | 5 | 4 | 25-TT | 43 | |
| 16 | 34 | 5 | 4 | 25-TT | 43 | |
| 17 | 34 | 5 | 4 | 25-TT | 43 | |
| 18 | 34 | 7 | 5 | 22-TT | 43 | |
| 19 | 34 | 7 | 5 | 22-TT | 43 | |
| 20 | 34 | 7 | 5 | 22-TT | 43 | |
| Table 6.2.2.4.1-9 | 1 | 34 | 3 | 2 | 29-TT | 43 |
| 2 | 34 | 3 | 2 | 29-TT | 43 | |
| 3 | 34 | 3 | 2 | 29-TT | 43 | |
| 4 | 34 | 3 | 2 | 29-TT | 43 | |
| 5 | 34 | 3 | 2 | 29-TT | 43 | |
| 6 | 34 | 3 | 2 | 29-TT | 43 | |
| 7 | 34 | 4.5 | 4 | 25.5-TT | 43 | |
| 8 | 34 | 4.5 | 4 | 25.5-TT | 43 | |
| 9 | 34 | 4.5 | 4 | 25.5-TT | 43 | |
| 10 | 34 | 6.5 | 5 | 22.5-TT | 43 | |
| 11 | 34 | 6.5 | 5 | 22.5-TT | 43 | |
| 12 | 34 | 6.5 | 5 | 22.5-TT | 43 | |
| 13 | 34 | 5 | 4 | 25-TT | 43 | |
| 14 | 34 | 5 | 4 | 25-TT | 43 | |
| 15 | 34 | 5 | 4 | 25-TT | 43 | |
| 16 | 34 | 6.5 | 5 | 22.5-TT | 43 | |
| 17 | 34 | 6.5 | 5 | 22.5-TT | 43 | |
| 18 | 34 | 6.5 | 5 | 22.5-TT | 43 | |
| 19 | 34 | 9 | 5 | 20-TT | 43 | |
| 20 | 34 | 9 | 5 | 20-TT | 43 | |
| 21 | 34 | 9 | 5 | 20-TT | 43 |
Table 6.2.2.5-4a: UE Power Class test requirements for Power Class 4 ( n260 )
| Test Configuration Table | Test ID | PPowerclass | MPRf,c | T(MPRf,c) | Lower limit(dBm) | Upper limit(dBm) |
|---|---|---|---|---|---|---|
| Table 6.2.2.4.1-7 | 1 | 31 | 2.5 | 2 | 26.5-TT | 43 |
| 2 | 31 | 2.5 | 2 | 26.5-TT | 43 | |
| 3 | 31 | 2.5 | 2 | 26.5-TT | 43 | |
| 4 | 31 | 2.5 | 2 | 26.5-TT | 43 | |
| Table 6.2.2.4.1-8 | 1 | 31 | 2 | 1.5 | 27.5-TT | 43 |
| 2 | 31 | 2 | 1.5 | 27.5-TT | 43 | |
| 3 | 31 | 3 | 2 | 26-TT | 43 | |
| 4 | 31 | 3.5 | 3 | 24.5-TT | 43 | |
| 5 | 31 | 3.5 | 3 | 24.5-TT | 43 | |
| 6 | 31 | 3.5 | 3 | 24.5-TT | 43 | |
| 7 | 31 | 5 | 4 | 22-TT | 43 | |
| 8 | 31 | 5.5 | 5 | 20.5-TT | 43 | |
| 9 | 31 | 5.5 | 5 | 20.5-TT | 43 | |
| 10 | 31 | 5.5 | 5 | 20.5-TT | 43 | |
| 11 | 31 | 3.5 | 3 | 24.5-TT | 43 | |
| 12 | 31 | 4 | 3 | 24-TT | 43 | |
| 13 | 31 | 4 | 3 | 24-TT | 43 | |
| 14 | 31 | 4 | 3 | 24-TT | 43 | |
| 15 | 31 | 5 | 4 | 22-TT | 43 | |
| 16 | 31 | 5 | 4 | 22-TT | 43 | |
| 17 | 31 | 5 | 4 | 22-TT | 43 | |
| 18 | 31 | 7 | 5 | 19-TT | 43 | |
| 19 | 31 | 7 | 5 | 19-TT | 43 | |
| 20 | 31 | 7 | 5 | 19-TT | 43 | |
| Table 6.2.2.4.1-9 | 1 | 31 | 3 | 2 | 26-TT | 43 |
| 2 | 31 | 3 | 2 | 26-TT | 43 | |
| 3 | 31 | 3 | 2 | 26-TT | 43 | |
| 4 | 31 | 3 | 2 | 26-TT | 43 | |
| 5 | 31 | 3 | 2 | 26-TT | 43 | |
| 6 | 31 | 3 | 2 | 26-TT | 43 | |
| 7 | 31 | 4.5 | 4 | 22.5-TT | 43 | |
| 8 | 31 | 4.5 | 4 | 22.5-TT | 43 | |
| 9 | 31 | 4.5 | 4 | 22.5-TT | 43 | |
| 10 | 31 | 6.5 | 5 | 19.5-TT | 43 | |
| 11 | 31 | 6.5 | 5 | 19.5-TT | 43 | |
| 12 | 31 | 6.5 | 5 | 19.5-TT | 43 | |
| 13 | 31 | 5 | 4 | 22-TT | 43 | |
| 14 | 31 | 5 | 4 | 22-TT | 43 | |
| 15 | 31 | 5 | 4 | 22-TT | 43 | |
| 16 | 31 | 6.5 | 5 | 19.5-TT | 43 | |
| 17 | 31 | 6.5 | 5 | 19.5-TT | 43 | |
| 18 | 31 | 6.5 | 5 | 19.5-TT | 43 | |
| 19 | 31 | 9 | 5 | 17-TT | 43 | |
| 20 | 31 | 9 | 5 | 17-TT | 43 | |
| 21 | 31 | 9 | 5 | 17-TT | 43 |
Примечание: переведено согласно 38.521-2-g70.